MP Essential - Can be used on metal or alloy panels, rigid plastics, GRP Glass Fibre and is the perfect finishing layer to any other bodyfiller. The perfect finishing layer for an ultra-smooth finish. Air dries – no hardener or mixing required.
New nano polymer technology creates an ultra smooth finish leaving no air bubbles and ready for priming and painting. Can be applied directly into the damaged area and will fill up to a depth of 3mm 3000 microns. Ideal for minor bodywork dents, shallow scuffs and scratches.
Simply - The curing time depends on the ambient temperature. Quick curing time – our fine putty once mixed with the hardener has a pot life working time of 3 to 5 minutes at an ideal processing temperature of 15°C to 25°C.
Can be applied directly in layers into the damaged area and will fill up to a thickness of up to 05 cm. Prevent corrosion – our extensive range of putties can effectively help to repair panel and component damage so that your vehicle is no longer exposed to corrosion.
Level small irregularities – our easy to use 2-component fine putty can smooth small irregularities like holes in surfaces of steel, aluminium, wood, concrete and polyester with excellent adhesion.
Re-sprayable – fine putty is re-sprayable with all lacquer systems after just 60 minutes curing time. Because of its very fine and elastic structure, it can be used as a finishing putty to create a perfect surface. It is then resistant to chemicals and weather influences. Very fine structure – it can be very easily hand sanded after 30 minutes.
Auto Extreme - Body filler Spray. Size: 300ml. Features a dual formula that primes and fills all in one. Ideal for covering light scratches, surface imperfections and pinholes. Super fine filler and easy to sand.
Dkhsy - It includes a scratch filler, a special scraper, and the water sandpaper and so on. Please use it in a dry and well-ventilated place.
10 to 30 degrees celsius is its optimum operating temperature. This car body putty scratch filer kit is used for filling in the pit with a depth of less than 2 mm on the paint surface, deep scratch or paint surface spalling etc.
In addition, it may not dry when using it below 0 degree Celsius. If the scratch filler is smeared too thick, so, its interior cannot completely harden, please control its applying thickness is about 2mm. If the temperature is too high or too low, it will affect its drying time.